Internal Combustion (IC) Forklift
Diesel Forklifts from Standard Yard Trucks to Heavy-Lift Industrial Models
Xinghao supplies diesel and internal combustion forklifts for yard logistics, manufacturing, construction material handling and heavy industrial loads. Start with the actual payload and load center, then check lift height, route geometry, surface, duty cycle, fuel type and destination-market emission requirements.
Choose the Internal Combustion Forklift Family First
1.5t–10t Standard Diesel
Counterbalance diesel forklifts for general yard, manufacturing, logistics and construction-material handling.
- Compact to medium-heavy capacities
- Multiple load-center configurations
- Mast and fork options by application
- Engine specification varies by model
12t–52t Heavy Lift Trucks
Larger diesel counterbalance forklifts for machinery, steel, stone, breakbulk and other heavy industrial cargo.
- 12 to 52 ton heavy-lift classes
- Larger rated load centers
- Heavy fork and carriage requirements
- Route and floor checks are essential
Stage V / Emission-Compliant Models
Use this series when destination-market emission requirements are a primary purchasing constraint.
- Confirm destination country first
- Confirm engine and emission certificate
- After-treatment is configuration-specific
- Do not infer compliance from capacity alone
LPG & Gasoline Forklifts
Dual-fuel internal combustion forklifts for buyers whose fuel infrastructure or mixed indoor-outdoor duty favors LPG or gasoline.
- Current visible range includes 2–7 ton
- 500 or 600 mm load center by model
- Engine package varies by capacity
- Ventilation still requires evaluation
Which Series Should You Compare First?
-
45 Ton Forklift• 45,000 kg rated lifting capacity• 1,250 mm published load center• 4,000 mm two-stage lift mast• 2,400 mm pin-type fork length• 25 / 28 km/h travel speed• 260 / 280 mm/s lifting speed• Weichai /Add to Inquiry -
Diesel 50 Ton Forklift• 50,000 kg rated lifting capacity• 1,250 mm published load center• 4,000 mm mast lift height• 2,600 mm heavy-duty fork length• 63,000 kg published service weight• Cummins 11.6L diesel engine• ZFAdd to Inquiry -
Low Profile Cushion Tire ForkliftA low-profile cushion tire forklift integrates standard counterbalance mechanics with a compact chassis and tire setup optimized for indoor operation. Unlike pneumatic-tire models built for mixed orAdd to Inquiry -
Industrial Cushion Tire ForkliftCounterbalance forklifts engineered with solid cushion tires are specifically designed for efficient material handling on firm, level, and prepared indoor or covered surfaces.Add to Inquiry -
Tight Turning Radius Cushion Tire ForkliftThis compact counterbalance forklift is engineered for efficient pallet handling on smooth, hard surfaces where maximizing floor-space utilization and operational agility are essential.Add to Inquiry -
Narrow Aisle Cushion Tire ForkliftThe Narrow Aisle Cushion Tire Forklift is a compact counterbalance truck engineered for high-density indoor facilities, including distribution centers, manufacturing plants, and commercialAdd to Inquiry -
Compact Cushion Tire ForkliftEngineered specifically for smooth concrete, asphalt, and improved indoor hard surfaces, the Compact Cushion Tire Counterbalance Forklift delivers high-efficiency material handling where operationalAdd to Inquiry -
Indoor Cushion Tire ForkliftThe Indoor Cushion Tire Forklift is a compact counterbalance lift truck engineered for pallet handling, production-line feeding, loading and unloading, and material movement on smooth, hard indoorAdd to Inquiry -
Building Material Handling ForkliftSelecting the correct industrial forklift for heavy building materials requires evaluating more than nominal tonnage. True operational efficiency depends on analyzing actual load geometry, center ofAdd to Inquiry -
Puncture Resistant Pneumatic Tire ForkliftStandard pneumatic tires frequently fail in heavy industrial environments due to sharp debris, metal shards, glass fragments, and nails, resulting in costly downtime and frequent replacements.Add to Inquiry -
Compact Pneumatic Tire ForkliftThe Compact Pneumatic Tire Forklift bridges the operational gap between indoor cushion-tire units and heavy-duty outdoor diesel trucks. Engineered for facilities operating across mixed indoor floorsAdd to Inquiry -
Indoor Outdoor Pneumatic Tire ForkliftAn indoor outdoor pneumatic tire forklift is engineered for operations requiring continuous movement between enclosed warehouses, loading docks, production areas, and paved or semi-paved outdoorAdd to Inquiry
Four Inputs Narrow the Diesel Forklift Choice
Capacity is only the first filter. A suitable internal combustion forklift must also match the load center, worksite geometry, surface and destination-market requirements.
Internal Combustion Forklift Family Selection Matrix
| Product Family | Current Role | Capacity Reference | Key Procurement Question | Go to Series |
|---|---|---|---|---|
| Standard Diesel | General industrial, yard and construction-material handling | Current category includes models from about 2 to 10 tons | Does the truck fit the load center, mast, route and daily duty? | View Standard Diesel |
| Heavy Lift Diesel | Heavy industrial cargo, machinery, steel, stone and breakbulk | 12–52 ton class | What is the real load moment and can the site support the larger chassis? | View Heavy Lift |
| Stage V / Regulated Market | Applications where emission compliance is a purchase requirement | Current category focuses on selected high-capacity models | Which exact engine and certificate are required for the destination market? | View Compliant Models |
| LPG & Gasoline | Dual-fuel IC handling where LPG or gasoline suits the operating environment | Current visible range about 2–7 tons | Is LPG supply, ventilation and fuel infrastructure suitable for the site? | View LPG / Gasoline |
Capacity Class Changes More Than Rated Tonnage
Standard Capacity
For general pallet, building material and factory handling, start with the standard diesel family and select the lowest suitable capacity around the actual load.
10–12 Ton Transition
When loads approach or exceed the upper end of the standard range, compare chassis, load-center and route requirements rather than simply adding nominal tonnage.
Heavy-Lift Platform
Above 12 tons, operating weight, fork size, rated load center, turning radius and floor capacity become increasingly important procurement inputs.
A Forklift Tonnage Rating Is Not Enough for Long or Irregular Loads
Xinghao diesel forklift models use different rated load centers. Smaller standard models commonly use 500 mm, several 5–10 ton models use 600 mm, and larger heavy-lift trucks may use substantially longer reference load centers.
This means two loads with the same gross weight can require different forklift configurations if their centers of gravity are different.
- Maximum gross load weight
- Load length, width and height
- Actual center of gravity
- Fork entry direction
- Required fork length and spacing
- Attachment weight and effective thickness
Send a Load Drawing for Irregular Cargo
Machinery, long steel products, stone, paper rolls and oversized packages can move the load center well beyond a standard pallet reference.
Model selection should use the real load moment rather than the tonnage label alone.
Confirm Compliance Before Confirming the Engine
Emission requirements depend on the destination market and selected engine configuration. Do not assume every diesel forklift or every engine option automatically carries the same Stage, Tier or market approval.
Diesel Is One Option within the Complete Material-Handling System
Choose Diesel When
The route, outdoor duty, operating schedule, load requirement and local fuel/service infrastructure support a diesel counterbalance configuration.
Compare Diesel Models →Compare Electric When
Indoor exhaust, charging infrastructure, operating noise and battery duty make an electric counterbalance truck worth comparing.
Compare Electric Forklifts →Compare LPG / Gasoline When
Fuel availability or mixed indoor-outdoor handling favors a dual-fuel internal combustion configuration.
Compare LPG / Gasoline →Match the Truck to the Worksite, Not Just the Industry Name
Industrial Yards
Check surfaces, turning areas, gradients, fuel access and daily travel distance.
Manufacturing
Match truck capacity to machinery, fabricated components, pallets and production logistics.
Construction Materials
Check load dimensions, terrain, tires, ground clearance and fork requirement.
Heavy Industrial Cargo
Use the heavy-lift range when load moment and cargo dimensions exceed standard forklift requirements.
Send These Four Data Groups before Choosing a Diesel Forklift
Load
Weight, dimensions, center of gravity and fork entry direction.
Lift
Fork height, mast clearance, fork size and attachment.
Worksite
Surface, gates, turning area, gradients and operating route.
Market
Destination, emission requirement, fuel preference and quantity.
Product, Solution and Supplier Verification Paths
Diesel and Internal Combustion Forklift Buying Questions
Start with maximum routine load, dimensions and actual load center. Then verify lift height, attachment, route geometry and working conditions before selecting the final capacity.
Compare the heavy-lift range when the load exceeds the standard series or when the cargo requires a larger load center, forks, chassis or attachment package.
No. Engine brand, displacement, output and emission configuration vary by forklift model and destination-market requirement. Confirm the exact engine in the final quotation.
Confirm the equipment rules for the destination country and project. The required engine, after-treatment and supporting documentation should be established before final configuration.
Compare the worksite, ventilation, operating schedule, fuel or charging infrastructure, load requirement, gradients and local service conditions. Power source should follow the complete duty cycle.
Send maximum load weight and dimensions, load center, lift height, fork or attachment requirement, worksite dimensions, surface and ramp conditions, destination, emission requirement, quantity and fuel preference.
Send the Load, Site and Market Data before Choosing the Model
We use the payload, center of gravity, required lift, worksite geometry, fuel preference and destination-market requirements together to narrow the suitable internal combustion forklift.
- Maximum load weight and dimensions
- Actual load center or cargo drawing
- Required lift height and forks
- Attachment requirement
- Surface, gates, turns and ramps
- Destination and emission requirement
Request a Diesel Forklift Recommendation
Please include maximum load weight and dimensions, load center, lift height, fork or attachment requirements, worksite conditions, destination country, emission requirement, quantity and fuel preference.
As one of the leading diesel forklift suppliers in China, we warmly welcome you to buy high quality diesel forklift for sale here from our factory. Good service and reasonable price are available.
3 5 ton diesel forklift with C240, Small 5 Ton Diesel Forklift, FD50