4WD Rough Terrain Forklifts
Xinghao designs and manufactures heavy-duty 4WD (four-wheel-drive) rough-terrain forklifts spanning rated capacities from 2.5 tons to 5.0 tons. Configured with planetary drive axles, oscillating rear steer axles, and automatic differential locks, our off-road counterbalance fleet is engineered to handle massive payloads on muddy building sites, timber yards, agricultural transit, and mining operations. Moving beyond standard indoor material handling, these 4x4 forklift trucks deliver reliable gradeability, high chassis clearance, and extreme biting traction under severe terrain restrictions.
Core Engineering Advantages:
- True 4x4 Off-Road Traction: Built with planetary drive axles and automatic differential locks (No-Spin) to instantly redirect torque when a wheel loses grip.
- Class-Leading Ground Clearance: Rugged monocoque chassis offers up to 300mm of ground clearance to safely navigate rocks, ruts, and dynamic terrain.
- Premium Diesel Drivetrains: Powered by globally-supported Cummins, Deutz, or Yuchai high-torque engines with EPA Tier 4 / Stage V emission options.
- Extreme Incline Stability: Low center of gravity paired with dynamic oscillating steering axles maintains tire contact on slopes up to 30 degrees.
- Universal B2B Attachment Versatility: Integrates high-pressure auxiliary hydraulic lines to support timber grabs, bucket scoops, side-shifters, and specialized clamps.
4WD Rough-Terrain Forklift Selection Matrix
Use the technical selection guide below to compare our primary 4x4 models:
|
Model Designation |
Rated Lift Capacity |
Ground Clearance |
Drivetrain & Axle Brand |
Standard Engine Brand |
Technical Specifications Link |
|---|---|---|---|---|---|
|
XH-RT25 Series |
2500 Kg |
270 mm |
Carraro Hydrostatic Axles |
Deutz / Xinchai Diesel |
|
|
XH-RT30 Series |
3000 Kg |
280 mm |
Carraro Hydrostatic Axles |
Yanmar / Deutz Diesel |
|
|
XH-RT35 Series |
3500 Kg |
280 mm |
Rigid Heavy planetary Axles |
Deutz / Cummins Diesel |
|
|
XH-RT40 Series |
4000 Kg |
300 mm |
Heavy Planetary Hub Reduction |
Cummins QSF3.8 (Stage V) |
|
|
XH-RT50 Series |
5000 Kg |
300 mm |
Heavy Planetary Hub Reduction |
Cummins Turbo Diesel |
Products
-
4WD Telescopic Handler 2.5T Capacity• 2,500 kg rated lifting capacity• 5.827 m maximum lifting height• 2.19 m maximum forward outreach• 800 kg capacity at maximum reach• Kubota V3307 diesel, 54.6 kW• Danfoss hydrostatic drive system•Add to Inquiry -
3500kg Rough Terrain Telehandler 4WD• 3,500 kg rated lifting capacity• 7.0 m maximum lifting height• 3.8 m maximum forward outreach• Yuchai 73 kW diesel engine• Danfoss hydrostatic drive system• Carraro wet brake drive axle• 430 mmAdd to Inquiry -
3 Ton Rough Terrain Forklift• 3,000 kg rated load capacity• 500 mm rated load center• 3,000 mm standard lift height• 2WD / 4WD drive configurations• 300 mm ground clearance• 3,800 mm turning radius• 1,220 mm standard forkAdd to Inquiry -
3.5 Ton Rough Terrain Forklift• 3,500 kg rated lifting capacity• 500 mm standard load center• 3,000 mm standard lift height• 2WD with optional 4WD drive• Approx. 280 mm ground clearance• Up to 30–35% gradeability• Up to 28 km/hAdd to Inquiry -
4 Ton Rough Terrain Forklift• 4,000 kg rated lifting capacity• 500 mm standard load center• 3,000 mm standard lift height• 2WD or 4WD drive configurations• 300 mm minimum ground clearance• ≥35% maximum gradeability• 32 km/hAdd to Inquiry -
5 Ton Rough Terrain ForkliftCapacity: 5,000 kg (Built for heavy outdoor payloads)Drivetrain: True 4WD for deep mud and loose gravelTraction: Front differential lock prevents getting stuckAxle: Oscillating rear axle maintainsAdd to Inquiry -
2.5 Ton Rough Terrain Forklift• 2,500 kg rated load capacity• 500 mm rated load center• 3,000 mm standard lift height• 2WD / 4WD drive configurations• 280 mm ground clearance• 3,600 mm turning radius• 30 km/h travel speed•Add to Inquiry
Advanced 4x4 Kinematics & Off-Road Drivetrain Rigidity
Standard counterbalance equipment faces immediate tire spin and drivetrain stress when operating on raw topsoil or loose aggregate yards. Xinghao 4WD counterbalance machines solve these field vulnerabilities with structural and mechanical reinforcement.
Automatic Differential Locking & Axle Oscillation
The core of our 4x4 mobility is the integrated planetary drive axle equipped with automatic differential lockouts. When operating in wet clay, timber forest floors, or steep slopes where one tire loses traction, the mechanical No-Spin differential instantly routes full output torque to the opposite wheel. This ensures the machine drives through soft spots without operator intervention. The rear steer axle supports up to 10 degrees of active oscillation, maintaining maximum tyre-to-ground contact over uneven rock beds and deep ruts.
High-Torque Drivetrains with Stage V Compliance
Our heavy-duty off-road material handling machines are configured to meet strict regional environmental laws. We supply globally-recognized Cummins and Deutz diesel blocks engineered with diesel particulate filters (DPF) and selective catalytic reduction (SCR) systems. These powertrains deliver their maximum torque output at low engine speeds (RPM), protecting your transmission from wear and reducing daily fuel Opex during high-load lift cycles.
Rigorous Quality Control & Gradeability Validation
Xinghao operates an extensive, outdoor unpaved proving ground to test off-road stability under dynamic loading conditions. Before container loading and global delivery, every 4WD unit must pass strict validation steps:
- 30% Gradeability Stall Audit: Each 4x4 counterbalance truck is loaded to its maximum rated capacity and operated on a 30% incline slope to verify hydrostatic transmission holds, service brakes, and park brake lockups.
- Chassis Torsional Scan: All high-stress robot welded areas on our thick monocoque chassis undergo dynamic twist testing over staggered ruts to measure welding deflection using ultrasonic scanners.
- Auxiliary Hydraulic Pressure Test: We cycle the lift pumps, proportional valves, and mast tilt cylinders at 125% of the standard rated pressure for several hours to confirm hydraulic seal integrity under extreme temperature stress.
Frequently Asked Questions (FAQ)
Q1: What is the primary operational difference between a 4WD rough-terrain forklift and a telescopic handler?
A1: A 4WD rough-terrain forklift is a traditional mast-equipped counterbalance machine designed primarily for fast, vertical lifting and towing of heavy pallets up to 6 meters. If your jobsite requires extreme forward outreach, high scaffolding placement up to 18 meters, or structural material feeding over obstacles, please consult our dedicated Telescopic Handlers inventory or review our comprehensive telehandler vs rough terrain forklift selection guide to determine which vehicle matches your project parameters.
Q2: Are enclosed oil-submerged brakes available on your 4WD series to prevent site grit failure?
A2: Yes. Standard dry drum brakes easily wear out and fail when exposed to deep mud, farm acids, sand, and coastal salinity. To protect your fleet's uptime, our larger 4WD off-road forklifts are engineered with fully enclosed, multi-plate wet disc brakes. By keeping the friction discs running inside a cooling oil bath, this sealed design completely prevents marine sand or mud from scratching the braking surfaces, reducing maintenance costs to almost zero. You can read more about why this technology is critical for tough outdoor environments in our technical guide on wet disc brakes.
Q3: How do the shipping dimensions of the 4WD counterbalance series affect B2B container transport?
A3: Xinghao provides highly optimized logistics packing to minimize sea freight Capex for our global dealer network. By removing the off-road tires and lowering the mast assembly horizontally, we can secure up to 3 complete units of our standard 3-ton 4WD forklifts inside a single standard 40-foot High Cube (40HQ) container. We provide complete, step-by-step reassembly drawings, hydraulic line schematics, and live video-link engineering support to ensure your yard mechanics can safely commission the machines upon port arrival.
Why Partner with Xinghao MHE?
Procuring field-grade material handling assets determines your project's daily throughput and safety envelope. As a direct, ISO-certified B2B forklift manufacturer in China, Xinghao MHE eliminates middleman importer fees while ensuring 100% compliance with international CE and global engine emission standards. We support our global dealer network with regional territorial protection policies, a continuous supply of standard wear parts shipped via fast DHL/FedEx courier services, and direct access to our heavy equipment engineering team.
Request Technical Layouts & Factory-Direct Pricing
Need custom mast configurations, agricultural attachment grabs, specialized tire tread profiles, or bulk dealer discounts? Xinghao's application engineers provide complete dynamic load charts, structural CAD files, and transparent FOB/CIF port quotations.
As one of the leading 4wd rough terrain forklifts suppliers in China, we warmly welcome you to buy high quality 4wd rough terrain forklifts for sale here from our factory. Good service and reasonable price are available.
3 Ton Rough Terrain Forklift, 3t rough terrain forklift, Rough Terrain Forklift 2 5 for yards