Warehouse Equipment
Warehouse Material Handling Equipment
Xinghao designs and manufactures high-density electric warehouse forklifts engineered to maximize pallet capacity, optimize narrow aisle configurations, and accelerate duty-cycle throughput. Powered by advanced smart-BMS CATL lithium-ion (LiFePO4) packs or heavy-duty traction lead-acid cells, our warehouse fleet spans from 1.0-ton pedestrian walkie stackers to 2.5-ton Very Narrow Aisle (VNA) articulated trucks capable of vertical lifting up to 12.5 meters. Xinghao material handling machinery provides logistics operations, third-party distribution hubs, and cold storage chains with emission-free indoor operations and a lower total cost of ownership (TCO).
Core Engineering Advantages:
- Aisle Optimization: Specialized narrow-aisle engineering allowing efficient stacking in corridors as narrow as 1.8 meters.
- High-Rack Residual Capacity: Rigid mast profiles and sway-dampening valves maintain class-leading load thresholds at vertical lift limits.
- Proportional Hydraulic Control: Micro-meter valve adjustment ensures smooth mast cushioning and eliminates hydraulic drift during high-bay pallet alignment.
- Opportunity Fast Charging: Integrated high-voltage CATL lithium-ion battery modules support rapid 90-minute charging for continuous multi-shift workflows.
- IP65 Sealed Electronics: Fully protected wiring harnesses and drive systems prevent condensation failures when transitioning into cold storage rooms.
Warehouse Equipment Selection Matrix
Compare our primary warehouse machinery lines and select the fleet configuration for your facility:
|
Equipment Category |
Rated Capacity Range |
Max. Lift Height |
Operating Aisle Width |
Steering & Lift Technology |
Target Technical Specifications |
|---|---|---|---|---|---|
|
VNA Articulated Forklifts |
1,500 Kg to 2,500 Kg |
Up to 12,500 mm |
1,800 mm to 2,000 mm |
180° Pivoting Mast, 80V Dual AC Drive |
|
|
Electric Reach Trucks |
1,500 Kg to 2,500 Kg |
Up to 12,500 mm |
2,800 mm to 3,000 mm |
Proportional Hydraulics, Sit/Stand Cab |
|
|
Electric Pallet Stackers |
1,000 Kg to 2,000 Kg |
Up to 4,500 mm |
2,000 mm to 2,200 mm |
Walkie/Rider Platform, AC Drive System |
Products
-
3 Ton VNA Forklift• 3,000 kg rated lifting capacity• 500 mm standard load center• 2.2 m aisle for 800×1200 pallets• 2.4 m aisle for 1000×1200 pallets• 210° articulated steering angle• 80V AC electric drive system•Add to Inquiry -
Sit-down Electric Reach Truck - Precision Handling SeriesRated Load Capacity: 1,600 kg / 2,000 kg (Palletized cargo optimization)Maximum Lifting Height: 6,000 mm to 10,500 mm (10.5-meter high-rack reach)Chassis Configuration: Sit-down ergonomic cab withAdd to Inquiry -
Stand-on Electric Reach Truck With Proportional Valve Con...Product Type: Stand-On Electric Reach TruckCapacity Options: 1,500–2,000 kgHydraulic Control: Proportional Valve SystemMast Options: Triplex Configurations up to 12.5 mDrive System: AC ElectricAdd to Inquiry -
48V Lithium-Ion Powered Electric Reach Truck For High-Rac...Rated Capacity Options: 1,600 kg / 2,000 kgLift Configurations: Up to 12,500 mmPower System: 48V Lithium-IonApplication: Indoor High-Rack Pallet HandlingMast Configuration: Triplex Options forAdd to Inquiry -
Heavy-Duty Electric Reach Truck - 12.5M Triplex Mast SeriesRated Load Capacity: 2,000 kg (Optimized for heavy pallet warehousing)Max. Lift Height: 12,500 mm (12.5-meter high-rack reach capability)Residual Capacity at 12.5m: 800 kg (Class-leadingAdd to Inquiry -
High-Lift Electric Reach Truck 1.5T With AC Drive SystemRated Load Capacity: 1,500 kg (1.5 Ton)Max Lift Height: 6,000 mm - 8,000 mm Mast Type: Triplex Mast with Full Free LiftBattery System: 48V Lithium-Ion (Opportunity Charging)Drive & Lift Motors:Add to Inquiry -
1.5 Ton VNA ForkliftThe xinghao narrow aisle articulated forklift is a versatile forklift. Powerful, durable and built to last, these vna articulating forklifts are designed for high-strength use both inside andAdd to Inquiry -
2 Ton VNA ForkliftXINGHAO 2 ton VNA forklift rated capacity 2000kg, mast height from 4300mm to 10050mm. Standard equipped with Electro-hydraulic proportional valve, valve speed can be adjusted according to the will,Add to Inquiry -
2.5 Ton VNA Forklift• 2,500 kg rated load capacity• 500 mm standard load center• About 2.0 m minimum aisle width• 80V AC ZAPI dual-core controller• Lead-acid or lithium battery options• 11 kW AC drive motor power• 14 kWAdd to Inquiry
Advanced Warehouse Fleets Built for Storage Density
Traditional counterbalance forklift trucks require wide aisles, sacrificing valuable pallet positions to turn-radius clearance. Xinghao's specialized indoor material handling machines solve these structural bottlenecks through precision kinematics and heavy-duty drivetrain components.
Maximizing Floor Space with Advanced Kinematics
By integrating VNA articulated forklifts into your fleet, you can pivot the front mast assembly 180 degrees to retrieve and stack pallets while the chassis remains straight in the aisle. This design reduces required corridor width to just 1.8 meters, instantly increasing racking capacity by up to 50 percent compared to standard layouts. To learn more about how pivoting axles maximize warehouse utilization without the capital expenditure of track guidance, consult our technical brief on articulated forklift advantages.
Zero-Emission Lithium-Ion Fleet Operations
Xinghao partners directly with CATL to supply industrial-grade lithium-ion (LiFePO4) battery packs managed by active Battery Management Systems (BMS). Unlike lead-acid traction units, our lithium-powered electric reach trucks and heavy-duty electric pallet stackers eliminate battery gassing bays, maintenance downtime, and battery swapping hoists. Our opportunity fast-charging modules restore 30 to 40 percent state-of-charge during standard shift lunch breaks, supporting continuous 24/7 terminal operations.
Rigorous Quality Control and High-Rack Load Stability
Verticle mast deflection under load is the leading cause of racking damage and pallet tipping in high-density facilities. Every warehouse vehicle manufactured by Xinghao undergoes dynamic load validation at our test yards before delivery:
- High-Altitude Dynamic Sway Defeat: Masts are tested at 125% of their rated payload capacity at maximum lift heights to audit the structural deflection of hot-rolled German steel channels.
- Continuous Cycle Hydrostatic Audit: Lift pumps, proportional control valves, and reach carriage actuators undergo 500 continuous full-extension lifting cycles to verify seal integrity and temperature management.
- Low-Temperature Condensation Chamber Analysis: All IP65-sealed electrical harnesses, controller modules, and traction motors are audited in simulated cold storage atmospheres to guarantee trouble-free operations in cold facilities down to -30°C.
Frequently Asked Questions (FAQ)
Q1: What is the recommended aisle width difference between reach trucks and VNA articulated forklifts?
A1: A typical electric reach truck requires an operating aisle of 2.8 to 3.0 meters because the entire chassis must execute a 90-degree turn to retrieve pallets. By contrast, a VNA articulated forklift only pivots its front steering joint, allowing it to easily handle standard ISO or Euro pallets in aisles as narrow as 1.8 to 2.0 meters. Reviewing your facility's turn-radius limits and storage constraints with our engineering team can help determine the correct configuration through customized warehouse forklift solutions.
Q2: Can your warehouse electric forklifts run continuously inside sub-zero cold storage facilities?
A2: Yes. Xinghao offers specialized Cold Storage Protection Packages for our entire warehouse machinery lineup. This option includes low-viscosity hydraulic oils certified down to -30°C, heated cabs equipped with double-pane condensation-proof glass, and fully encapsulated, sealed electrical harnesses to prevent moisture penetration when moving between cold chambers and standard loading bays.
Q3: How are standard electric reach trucks packaged to minimize international ocean shipping costs?
A3: To lower sea freight Capex for our global dealership network, standard reach trucks and VNA articulated models are secured with masts removed and packed horizontally alongside the main chassis. Typically, we can secure up to 4 complete warehouse units inside a single 40-foot High Cube (40HQ) container. Xinghao provides complete, step-by-step reassembly video guides and live video-link engineering support to ensure your maintenance mechanics can safely complete the commissioning process.
Why Partner with Xinghao MHE?
Procuring high-density vertical material handling assets dictates your logistics terminal's long-term margin and cycle speeds. As a direct, ISO-certified B2B manufacturer in China, Xinghao MHE eliminates middleman agency fees while maintaining strict ISO 9001 and CE compliance. We support our global network of machinery dealers, warehouse integrators, and fleet managers with direct-from-factory warranty terms, a reliable global supply of replacement wear parts dispatched via fast DHL/FedEx courier services, and live video-link diagnostic support directly from our application engineers.
Request Technical Layouts & Factory-Direct Pricing
Need custom mast lift heights, cold storage configurations, specialized warehouse attachments, or volume dealer terms? Xinghao's application engineers provide complete dynamic load charts, exact turning radius curves, and transparent FOB/CIF port quotations.
As one of the leading warehouse equipment suppliers in China, we warmly welcome you to buy high quality warehouse equipment for sale here from our factory. Good service and reasonable price are available.
