FD80T baseline configuration
8,000 kg Capacity at a 600 mm Load Center
The FD80T 8 ton diesel forklift is a seat-driven counterbalanced truck rated for 8,000 kg at a 600 mm load center. The detailed configuration data identifies a 3,000 mm lift, 1,220 × 175 × 75 mm forks and pneumatic tires. Selection must still account for the raised load height, actual center of gravity, attachment weight, travel surface and site clearance.
8,000 kgRated capacity
600 mmRated load center
3,000 mmBaseline lift height
3,650 mmOutside turning radius
Configuration reconciliation
Lock One Specification Set into the Purchase Order
Several alternative values are associated with the CPCD80/FD80 product range. They must not be combined into a single standard truck. We identify the exact engine, mast, transmission, tires, operating weight and fuel-tank capacity in the approved quotation.
Detailed FD80T baseline
Mast3,000 mm lift height
Truck weight11,800 kg
Tires9.00 × 20-14PR pneumatic
Fuel tank140 L
Engine choicesIsuzu 6BG1 or Chaochai 6102BG listed
Alternative descriptions to verify
Mast4.5 m and optional 5.5 m descriptions
Truck weight12,800 kg description
Tires20.5-16 solid-tire description
Fuel tank220 L description
EngineIsuzu 6HK1 and separate output claims
Baseline technical data
FD80T Dimensions and Performance
| Model | FD80T |
|---|---|
| Power unit | Diesel |
| Operator type | Driver / seat |
| Rated load capacity | 8,000 kg |
| Rated load center | 600 mm |
| Baseline lift height | 3,000 mm |
| Free lift | 205 mm |
| Fork dimensions | 1,220 × 175 × 75 mm |
| Mast tilt, forward / backward | 6° / 12° |
| Overall length without forks | 3,955 mm |
| Overall width | 2,245 mm |
| Lowered mast height | 2,850 mm |
| Raised height with backrest | 4,330 mm |
| Overhead guard height | 2,560 mm |
| Outside turning radius | 3,650 mm |
| Fork face to front axle | 710 mm |
| Minimum right-angle stacking aisle | 6,000 mm, excluding load length and clearance |
| Loaded / unloaded travel speed | 26 / 30 km/h |
| Loaded / unloaded lift speed | 450 / 500 mm/s |
| Loaded / unloaded lowering speed | 530 / 500 mm/s |
| Loaded gradeability at 1.6 km/h | 24% |
| Listed truck weight | 11,800 kg |
| Wheel quantity, front / rear | 4 / 2 |
| Tire size, front / rear | 9.00 × 20-14PR / 9.00 × 20-14PR |
| Wheelbase | 2,500 mm |
| Front / rear tread | 1,600 / 1,700 mm |
| Ground clearance at mast | 245 mm |
| Service brake | Brake-booster dynamic braking |
| Parking brake | Mechanical hand lever |
| Starting battery | 2 × 12 V / 80 Ah |
| Listed engine choices | Isuzu 6BG1 / Chaochai 6102BG |
| Fuel tank capacity | 140 L |
| Hydraulic system pressure | 200 kg/cm² |
Load-moment check
Eight Tonnes Is Not Available at Every Geometry
Load moment = load weight × load-center distance
Increasing the load center beyond 600 mm increases the load moment even when the weight does not change. Raised height, fork projection and attachments also affect residual capacity.
- What is the maximum gross load weight?
- Where is the horizontal center of gravity?
- What fork height is required at placement?
- Will side shift, positioners or clamps be fitted?
- Does the load create offset or uneven fork loading?
- Which residual load chart applies to the ordered mast?
Route validation
Check the Full Operating Path Before Quotation
Entrance
Compare the 2,245 mm truck width and 2,560 mm guard height with gates, doors and overhead services.
Turn
Add fork length, load projection and clearance to the 3,650 mm outside turning radius.
Approach
The 6,000 mm aisle figure excludes load length and clearance. Confirm the actual rack or trailer approach.
Support
Review floor slabs, ramps and dock plates for the truck, load and axle distribution at the working condition.
Application boundary
Match the Work Cycle, Surface and Load Type
Industrial yards
The counterbalanced diesel layout can suit outdoor loading and transfer routes when the surface, gradient, ventilation and traffic plan are appropriate.
Machinery and dense materials
Provide dimensions and center-of-gravity data for machinery, molds, steel products or other dense loads. Nominal weight alone is insufficient for selection.
Special terrain
Pneumatic tires and 245 mm mast clearance do not make the FD80T a dedicated rough-terrain forklift. Loose soil, deep ruts and steep grades require a separate traction and stability review.
Order and acceptance
Verify the Delivered Configuration Against One Record
Before production confirmation
- Load weight, dimensions and center of gravity
- Required lift height and mast type
- Fork length, carriage and attachment
- Engine model and destination emission requirement
- Tire, transmission, cab and warning-device scope
Before dispatch
- Truck, engine and mast plate records
- Fork dimensions and attachment function
- Travel, steering, brake, lift and tilt checks
- Tire size, fluid leakage and visible condition
- Accessories, manuals and packing-list reconciliation
Shipping planning should use the approved transport drawing and confirmed truck weight. Mast lowering, separately packed parts and container or flat-rack requirements depend on the final configuration rather than the nominal FD80T name alone.
Build One Traceable FD80T Configuration
Send the load, height, route and destination requirements so we can reconcile the technical fields before quotation.
Related selection paths
Compare Capacity Classes and Project Support
1.5–10t standard diesel forkliftsReview the complete standard range. 7 ton diesel forkliftCompare the adjacent lower load class. 10 ton diesel forkliftEvaluate additional nominal capacity. 12 ton diesel forkliftMove into the heavy-lift range. Construction and mining solutionsAssess demanding outdoor conditions. Warehouse and logistics solutionsPlan loads, routes and material flow. After-sales and parts supportPrepare the service and parts plan. Manuals and training supportPlan receiving and operator preparation. Contact our teamSend project data for technical review.
FD80T procurement FAQ
Questions to Resolve Before Purchase
Is the FD80T rated for 8,000 kg at any load center?
No. The 8,000 kg rating is stated at a 600 mm load center. Longer loads, raised height, offset loading and attachments can reduce available capacity.
Is the standard lift height 3,000 mm or 4.5 m?
The detailed FD80T table lists 3,000 mm, while separate descriptions mention 4.5 m and 5.5 m configurations. The quotation must identify the ordered mast, lowered height and residual load chart.
Which engine is supplied with the 8 ton diesel forklift?
The detailed data lists Isuzu 6BG1 and Chaochai 6102BG choices, while another description names Isuzu 6HK1. We state the selected engine model, rating and emission documents in the quotation.
How much aisle space does the FD80T need?
The listed right-angle stacking aisle is 6,000 mm without load length and clearance. Final planning must add the load projection, fork length, operating allowance and actual approach path.
Can side shift or a clamp be fitted?
The attachment must be matched to the carriage and hydraulic circuit. Its weight, thickness and center-of-gravity effect must be included in the residual-capacity review.
What information is needed for an FD80T quotation?
Send load weight and dimensions, center of gravity, lift height, fork or attachment requirement, route dimensions, surface and gradient, emission requirement, quantity and destination country.
Confirm the Exact FD80T Before Ordering
Use one approved data sheet for the mast, engine, tires, weight, transmission and fuel tank.
Hot Tags: 8 ton diesel forklift, FD80T diesel forklift, 8000 kg forklift, heavy load forklift, counterbalanced diesel forklift, 8 ton forklift supplier, 12 ton Heavy Duty Fork Forklift, counterbalanced 7 ton forklift, 10 ton diesel forklift with 6BG1, Small 5 Ton Diesel Forklift Work In Container, 2 0 ton diesel forklift truck, diesel small 5 ton forklift
