XH-TF357: 3.5 Ton Telescopic Forklift with 7-Meter Reach
Xinghao's XH-TF357 represents the industrial-grade benchmark for mid-capacity bulk handling, designed to execute high-frequency material stacking, aggregate bucket loader cycles, and waste recycling logistics. Driven by a high-torque Perkins or Cummins turbocharged diesel engine and a premium Danfoss hydrostatic transmission, this dynamic telescopic forklift combines a 3,500 kg maximum load capacity with a 7,000 mm vertical lift. Engineered with a 115 L/min load-sensing proportional hydraulic system, it operates complex active attachments-such as high-volume crop buckets, rotating pulp grabs, and lumber clamps-without hydraulic latency or thermal system wear.
Agro-Industrial Agility & High-Flow Auxiliary Hydraulics
While standard vertical counterbalance machines struggle with unpaved logistics, raw material yards demand continuous, high-speed aggregate scooping, pile consolidating, and bale stacking. The XH-TF357 utilizes heavy steel plate construction and balanced weight distribution to dominate these high-frequency material handling nodes.
115 L/min Proportional Flow Output
Running hydraulic attachments-like heavy waste clamps, timber grabs, and high-torque silage sweepers-requires high hydraulic energy. Standard 80 L/min pump circuits experience massive pressure drop-offs during simultaneous boom extension and attachment operation. Xinghao overcomes this constraint by integrating a dedicated axial piston pump that maintains a constant 115 L/min auxiliary oil flow at 240 Bar. Operators can lift, extend, and rotate hydraulic implements simultaneously with zero performance lag, improving overall cycle speeds by up to 25%.
Dynamic "Pick-and-Carry" Chassis Stability
Unlike bulky construction-grade telescopic lifts that rely on static, ground-anchored stabilizer outriggers, the XH-TF357 is engineered as a dynamic yard Generalist. Built with a wide-track 2060mm chassis and an extra-heavy integrated counterweight, this model safely transports, maneuvers, and stacks its full rated payloads without needing outriggers. This provides unmatched cycle agility when loading high-sided grain trucks, shifting waste recycling bales, or managing gravel aggregate hoppers.
If your warehouse requires a lower-profile, ultra-narrow machine tailored specifically for greenhouse corridors and low-clearance livestock barns, please consult our specialized 2.5 Ton compact telehandler 5.8m lift series. For heavy construction duties requiring stabilizing outriggers and lifts up to 13.5 meters, review our high-altitude 4 Ton telehandler 13.5m lift height model.
Technical Specifications & Performance Matrix (Set 2 - Complete)
The following table details the complete engineering, dimensional, and performance metrics of our 3.5-ton high-flow multi-purpose handler:
|
Engineering Dimension |
Technical Parameter / Specification Metric |
|---|---|
|
Model Designation |
XH-TF357 Standard Agro-Industrial |
|
Rated Load Capacity |
3,500 kg (at 500mm standard load center) |
|
Maximum Vertical Lift Height |
7,000 mm (7-meter stacking ceiling) |
|
Maximum Forward Outreach |
3,900 mm |
|
Capacity at Max. Lift Height |
2,500 kg |
|
Capacity at Max. Forward Reach |
1,200 kg |
|
Engine Configuration Options |
Cummins QSF3.8 / Perkins 1104D-44TA Turbocharged |
|
Rated Power Output |
74 kW (99 HP) @ 2,200 RPM |
|
Emission Standards Compliance |
EPA Tier 4 Final / EU Stage V compliant |
|
Drivetrain Architecture |
Danfoss Hydrostatic Closed-Loop Pump |
|
Axle Specification |
Carraro Planetary Hub Reduction Axles with 4WD |
|
Service & Parking Brakes |
Enclosed Multi-Plate Wet-Disc Brakes (Oil-cooled) |
|
Main Auxiliary Hydraulic Flow |
115 L/min @ 240 Bar (Load-sensing proportional) |
|
Hydraulic Oil Reservoir Capacity |
130 Liters |
|
Chassis Track Width |
2,060 mm |
|
Wheelbase |
2,850 mm |
|
Outside Turning Radius (Tires) |
3,650 mm (Agile coordinating steering) |
|
Maximum Travel Speed |
32 km/h (In-yard and road transit) |
|
Maximum Towing Drawbar Pull |
72 kN |
|
Tyre Configuration (Agri-Tread) |
16/70-20 Tubeless Pneumatic Tires |
|
Total Operating Machine Weight |
7,800 kg (with standard carriage and forks) |
Our Product
Carraro Axles & Multi-Mode Steering for Slippery Farmland
Maintaining stable traction inside wet silage pits, muddy recycling yards, and unpaved aggregate yards requires advanced wheel-torque multiplication.
- Carraro Hub-Reduction Planetary Axles: Heavy-duty limited-slip differentials deliver outstanding torque directly at the wheel ends. This avoids tire slippage in wet manure, aggregate gravel, or deep clay while protecting the hydrostatic transmission from shock loads.
- Front-Wheel Steer Mode: For safe public road transit and high-speed towing up to 32 km/h.
- 4-Wheel Steering Mode: Minimizes the steering circle to a tight 3,650mm, letting operators execute complete turns within narrow barn lanes or tight recycling enclosures.
- Crab Crawl Steering: Enables lateral diagonal movements, helping the operator safely walk the machine alongside walls and pull away from trenches or stacked bulk stockpiles.
Every single XH-TF357 unit must pass our dynamic factory testing protocols before being cleared for ocean container loading:
- Overload Structural Stress Scan: We test the boom at 125% rated capacity, extending the telescopic sections horizontally to audit structural deflection and the automatic Load Moment Indicator (LMI) bypass.
- Ramp Gradeability Hold Test: Brakes are tested on a 30% unpaved incline slope under full load to confirm hydrostatic transmission locks hold the chassis.
- High-Cycle Thermal Hydraulic Audit: We run the 115 L/min pump continuously under full pressure for several hours to monitor oil heat dissipation and ensure zero pressure drops.
Typical Project Applications
The high-flow proportional hydraulics and dynamic "pick-and-carry" stability of the XH-TF357 make it highly productive across multiple industrial applications:
- Agricultural Logistics & Bulk Feeds: Handling grain buckets, straw bale clamps, and fertilizer bags over high hoppers.
- Waste Management & Recycling Centers: Pushing and stacking crushed paper bales, scrap metal, and municipal solid waste with specialized rotators or clamp attachments.
- Timber and Forestry Yards: Shifting heavy log bundles over unpaved forest soils using dual auxiliary hydraulic grapples.
- Urban & Infrastructure Construction: Feeding bricks, concrete buckets, and dry mortar bags over foundation trenches without setting up static outriggers.
Frequently Asked Questions
Q1: Why is a 3.5-ton 7m telehandler superior to a standard wheel loader for bulk grain and recycling yards?
A1: A standard wheel loader can only scoop and dump in a fixed vertical arc, which limits its forward outreach. Our 3.5-ton telescopic loader provides a 7-meter vertical lift and a forward outreach of 3.9 meters. This allows operators to easily load high-sided aggregate trucks from a single side, feed agricultural mixers from ground level, and stack recycling bales much higher to maximize your indoor storage space. To evaluate your project's optimal machinery platform, consult our comprehensive B2B telehandler vs rough terrain forklift selection guide.
Q2: What attachments are most effective for this high-flow agricultural series?
A2: Thanks to our high-flow 115 L/min auxiliary system, the XH-TF357 excels with active hydraulic implements. Global B2B buyers frequently configure this machine with large-volume 2.5m³ grain buckets, silage grabs with high-holding force, rotating paper/recycling bale clamps, timber grabs, and high-altitude work platforms. We help you choose the correct equipment configurations through our dedicated agriculture material handling solutions portal.
Q3: How do the shipping dimensions of the XH-TF357 affect B2B ocean freight costs?
A3: To minimize container space and lower international shipping Opex for our dealership networks, we ship this telehandler with tires and attachments removed, sitting flat inside standard 40-foot High Cube (40HQ) containers. Typically, we can secure two complete 3.5-ton units inside a single 40HQ container. Xinghao provides step-by-step reassembly video guides and live video-link engineering support to ensure your yard mechanics can safely complete the commissioning process.
Why Partner with Xinghao MHE?
Procuring versatile material handling assets determines your facility's daily throughput and safety margins. As a direct, ISO-certified B2B manufacturer in China, Xinghao MHE eliminates middleman agency fees while maintaining 100% compliance with CE, ISO 9001, and Stage V emissions standards. We support our global dealer network with regional territorial protection, a continuous supply of standard wear parts (dispatched via fast DHL/FedEx courier services), and direct video-link diagnostic support from our heavy equipment engineering team.
Request Technical Layouts & Factory-Direct Pricing
Xinghao's engineering team provides detailed CAD block drawings, exact residual capacity load charts, and transparent FOB/CIF pricing based on your fleet requirements.
Request Specifications / Get a Quote
Our factory
Hot Tags: 3.5 ton telescopic forklift 7m reach, China 3.5 ton telescopic forklift 7m reach suppliers, factory, telehandler forklift
