Home > Knowledge > Content

16 Ton Diesel Forklift Buying Guide

Nov 10, 2026
Heavy-Duty Forklift Buying Guide

What Should You Check Before Buying a 16 Ton Diesel Forklift?

A 16 ton forklift is a major equipment purchase. The rated capacity matters, but so do load dimensions, lifting height, engine support, site access and shipping costs.

Two forklifts with the same 16,000 kg rating may have different load centers, dimensions and attachments. Comparing these details helps you choose a machine that fits your work.

Start with Your Heaviest Load

Record its weight, length, width and center of gravity. Then check the forklift's rated load center, lifting height and capacity chart. Engine and shipping choices come next.

Step 1 · Load Capacity

Check the Rated Load Center, Not Just 16 Tons

The load center is the horizontal distance from the vertical fork face to the load's center of gravity.

This distance changes with the cargo's size and weight distribution. A longer load can place its center of gravity farther forward.

Load-Center Rating What It Means
16,000 kg at 600 mm The truck has a 16 ton rating at a 600 mm horizontal load center.
16,000 kg at 900 mm The truck has a 16 ton rating at a 900 mm horizontal load center.
Load center beyond rating The allowable capacity must be taken from the applicable truck capacity information.
A Useful Difference for Long Loads

Our FD160 long-load configuration is rated at 16,000 kg with a 900 mm load center. This rating is relevant when handling large machinery parts, industrial frames and other long cargo.

The actual load must still remain within the truck's approved capacity for its lifting height and attachments.

Step 2 · Lifting Height

Choose the Mast for Your Loading Height

Heavy forklifts handle cargo at different heights. The right mast depends on where the load must be picked up and placed.

The FD160 range includes a 3,500 mm lifting-height specification and a 4,000 mm duplex mast option.

A taller mast does not automatically provide the same load capacity at maximum height. Use the capacity chart for the selected mast.

Mast Dimensions to Check
  • Required fork lifting height
  • Lowered mast height
  • Fully extended mast height
  • Free-lift height, if required
  • Capacity at the working lift height
Step 3 · Engine and Service

Compare Diesel Engines and Local Support

Diesel engine selection should reflect your working hours, site conditions, fuel requirements and local maintenance resources.

Engine Power

Review the exact engine model, rated power and transmission pairing for the complete truck.

Emissions

Confirm that the engine version meets the requirements of the destination market.

After-Sales Support

Check local access to service technicians, filters, spare parts and engine diagnostics.

When comparing Cummins and Weichai options, use the actual engine models and local service availability rather than brand names alone.

Step 4 · Working Space

Make Sure the Forklift Fits Your Site

A forklift with enough lifting capacity may still be unsuitable if it cannot turn, pass through an access route or work safely at the loading point.

The FD160 long-load configuration has a published overall width of 2,480 mm and a minimum turning radius of 5,340 mm.

The space needed for a turn also depends on the length and position of the cargo.

FD160 heavy-duty forklift chassis side view showing industrial tyres and wheelbase
Access Width

Check gates, doorways, turning areas and the space needed for the loaded forklift.

Ground Conditions

Review surface strength, slopes, obstacles and drainage in working areas.

Loading Area

Allow space for safe approach, fork entry and load placement.

Step 5 · Forks and Attachments

Select Attachments for the Cargo You Handle

Forks and attachments can make a heavy forklift more useful, but they must suit the cargo and the truck's rated capacity.

Fork Positioner

Adjusts fork spacing hydraulically for compatible loads with different support widths.

Side Shift

Allows lateral adjustment of the fork assembly during load alignment.

Longer Forks

May be suitable for longer cargo when the load, fork strength and capacity are matched.

Ask for the truck's capacity information with the intended attachment installed. The base forklift rating may not apply unchanged.

Step 6 · Shipping and Delivery

Include International Shipping in the Purchase Cost

A heavy forklift's transport dimensions can affect the shipping method, freight quotation and destination handling costs.

Our FD160 range has a dismantled arrangement for 40HQ container shipping. This gives buyers an alternative to flat-rack transport for suitable configurations.

Depending on freight rates and preparation costs, container shipping may reduce the total cost of delivery.

40HQ Shipping and Cargo Size

The assembled FD160 is 2,480 mm wide, while a typical 40HQ container door is approximately 2,340 mm wide.

The dismantled components must fit the container's actual dimensions, payload limits and securing plan.

40HQ container dimensions

Step 7 · Price Comparison

Compare the Total Cost of Ownership

The purchase price is only one part of the cost. Fuel, maintenance, repairs and delivery can have a significant effect over the machine's working life.

Cost What to Compare
Equipment Price Complete truck, engine, mast, forks, attachments and cab equipment.
Freight and Handling Sea freight, packing, unloading, inland transport and assembly.
Fuel Expected working hours, duty cycle and local diesel cost.
Maintenance Service intervals, parts, labour and consumables.
Downtime Repair response, spare-parts lead times and available service support.

Compare quotations with the same engine, mast, forks, attachments, delivery terms and after-sales scope.

FD160 Specifications

XINGHAO FD160: Key Figures to Review

The FD160 long-load diesel forklift offers a 900 mm rated load center and a transport design suited to dismantled container shipment.

16,000 kg Rated capacity at 900 mm
3,500 mm Published lifting height
40HQ Dismantled shipping arrangement
Specification FD160 / CPCD160
Power Diesel
Rated Capacity 16,000 kg at 900 mm load center
Lift Height 3,500 mm
Fork Dimensions 1,800 × 200 × 100 mm
Wheelbase 3,800 mm
Overall Width 2,480 mm
Minimum Turning Radius 5,340 mm
Service Weight 22,000 kg
Purchase Checklist

What to Send with Your Forklift Enquiry

A few details about the load and working conditions help us recommend the right machine and prepare a more useful quotation.

Load and Site
  • Maximum cargo weight
  • Load dimensions and center of gravity
  • Required lifting height
  • Doorways, roads and turning space
  • Ground and working conditions
Equipment and Delivery
  • Preferred engine or emissions standard
  • Required fork and attachment options
  • Working hours per day
  • Destination country and port
  • Delivery and installation requirements
Frequently Asked Questions

16 Ton Diesel Forklift Buying FAQ

Is a 16 ton forklift suitable for every 16,000 kg load?

No. The load's center of gravity, lifting height and attachments affect the allowable capacity. Check the rated load information for the complete forklift.

Why does a 900 mm load center matter?

It identifies the horizontal load-center distance at which the forklift's stated capacity applies. It is important when comparing trucks for large loads.

How do I choose between Cummins and Weichai engines?

Compare the exact engine models, emissions requirements, power ratings, local service availability and maintenance costs.

Can a 16 ton forklift be shipped in a 40HQ container?

Some models can be prepared for dismantled container transport. The FD160 has a 40HQ shipping arrangement. Packed dimensions, payload and securing must match the selected container.

What affects the price of a 16 ton diesel forklift?

Engine selection, mast height, forks, hydraulic attachments, emissions equipment and delivery terms can all affect the final price.

What should I check before accepting a quotation?

Check the complete equipment specification, capacity chart, warranty, spare-parts support, freight scope and delivery terms.

Find the Right 16 Ton Diesel Forklift

Share your load dimensions, lifting height, working conditions and destination. We'll help you review the FD160 specifications, available equipment and shipping options.

Request Specifications & Pricing
Send Inquiry