3.5 Ton Electric Forklift Truck for Configured Industrial Handling
Our FB35 electric forklift truck is rated for 3,500 kg at a 500 mm load center and uses an 80 V electrical platform. The model is suitable for buyers who need the 3.5-ton electric class together with cab, mast or hydraulic attachment configuration for a defined material-handling task.
Select the Truck Around the Load-Handling Method
Two operations can both require 3,500 kg capacity but need very different forklift configurations. Standard pallet handling, clamping, elevated stacking and outdoor covered work each place different demands on the mast, forks, attachment and operator enclosure.
We recommend defining the load and handling method before confirming the FB35 build.
FB35 Cab, Mast and Attachment Views
Watch the 3.5 Ton Electric Forklift Truck
Review the general chassis, mast and counterbalance layout in the original product video before selecting the final configuration.
We confirm the supplied mast, battery, cab and attachment against the approved quotation.
FB35 Electric Forklift Truck Specifications
Core Selection Values
- Rated load: 3,500 kg
- Load center: 500 mm
- Standard lift: 3,000 mm
- Overall width: 1,225 mm
- Turning radius: 2,320 mm
- Service weight: 5,400 kg
| Model | FB35 |
|---|---|
| Rated Load Capacity | 3,500 kg |
| Load Center | 500 mm |
| Standard Lift Height | 3,000 mm |
| Maximum Working Height | 4,210 mm |
| Fork Dimensions | 50 × 125 × 1,070 mm |
| Mast Tilt, Forward / Backward | 6° / 12° |
| Fork Face to Rear Body | 2,540 mm |
| Overall Width | 1,225 mm |
| Mast Lowered Height | 2,065 mm |
| Overhead Guard Height | 2,150 mm |
| Turning Radius | 2,320 mm |
| Front Axle Center to Fork Face | 485 mm |
| Travel Speed, Loaded / Unloaded | 13 / 14 km/h |
| Lift Speed, Loaded / Unloaded | 280 / 360 mm/s |
| Lowering Speed, Loaded / Unloaded | 500 / 450 mm/s |
| Full-Load Gradeability | 15% |
| Service Weight | 5,400 kg |
| Front Tire | 28×9-15 |
| Rear Tire | 18×7-8-14PR |
| Wheelbase | 1,700 mm |
| Front / Rear Track | 1,000 / 980 mm |
| Battery Voltage | 80 V |
| Standard Battery Capacity | 500 Ah / 5HR |
| Battery Box Size | 968 × 664 × 770 mm |
| Published Battery Weight | 1,560 kg |
| Oil Pump Motor | 14 kW |
| Traction Motor | 13 kW |
| Optional Lithium Battery | 80 V / 450 Ah |
Confirm Cab Requirements from the Operating Environment
Product images show an enclosed cab configuration. We recommend specifying the required cab arrangement before quotation rather than assuming the same enclosure is standard for every FB35 order.
The decision should reflect whether the truck works indoors, in covered loading areas or in more exposed operating zones.
Cab Details to Specify
- Open or enclosed operator area
- Working temperature and environment
- Door and overhead clearance
- Visibility requirements around the load
- Any required climate-control option
Attachment Selection Changes the Handling Geometry
The product imagery shows a hydraulic clamp configuration. If a clamp, fork positioner, sideshift or another attachment is required, include it when the truck capacity is reviewed. Attachment depth and weight can change the load center and available capacity.
Clamp Attachment
Provide the load shape, width, surface and required clamping method before selection.
Fork Positioning
Tell us the minimum and maximum required fork spacing for varying pallet widths.
Sideshift
Use lateral adjustment where final pallet alignment is part of the normal handling cycle.
80 V Drive System for the 3.5 Ton Capacity Class
Published standard battery capacity.
Published lithium battery option.
Traction motor power.
Hydraulic pump motor power.
We recommend matching the battery configuration to shift hours, lifting frequency, travel duty, ramp use and available charging periods. The optional lithium battery should not be treated as standard equipment unless it is specified in the order.
3,500 kg Is Rated at a 500 mm Load Center
A clamp, longer pallet or irregular load can move the effective center of gravity farther forward. The nominal 3,500 kg rating should therefore be reviewed together with the actual load geometry.
- Maximum load weight
- Load length, width and height
- Expected load center
- Required lifting height
- Attachment type and approximate weight
- Operating aisle and turning space
Avoid Selecting from Tonnage Alone
A 3,500 kg load on standard forks and a lighter load carried on a deep hydraulic attachment do not create the same load moment.
Send the complete load and attachment data so we can review the configuration together.
Check the FB35 Footprint with the Attachment Installed
Published overall truck width.
Published turning radius.
Overhead guard height.
Mast lowered height.
An attachment can extend beyond the standard fork face, so warehouse suitability should be checked using the complete configured truck, load dimensions and actual turning pattern.
Where a Configured FB35 Electric Forklift Fits
Heavy Pallet Handling
Move loads that genuinely require the 3,500 kg electric counterbalance class.
Clamp Handling
Configure a hydraulic attachment for loads that are not handled with standard forks.
Manufacturing
Transfer heavier materials and finished products between production and storage.
Covered Yard Work
Confirm cab, surface and charging conditions for mixed indoor and covered-yard routes.
Compare the FB35 Before Moving to a Larger Chassis
3 Ton Electric Forklift
Choose the lower capacity class when normal loads remain within 3,000 kg.
FB35 Electric Forklift
Review the standard FB35 page when the main purchasing task is capacity, battery and warehouse fit rather than a configured cab or attachment package.
4 Ton Electric Forklift
Compare the heavy-duty electric range when routine loads move beyond the FB35 capacity.
Send These Details for a Configured FB35 Quote
Load
Maximum weight, dimensions and load center.
Attachment
Fork, clamp, sideshift or other hydraulic requirement.
Worksite
Lift height, aisle, doorway, ramp and cab requirements.
Order
Battery preference, quantity and destination country.
Continue Electric Forklift Selection
FB35 Electric Forklift Truck Buying Questions
The FB35 is rated for 3,500 kg at a 500 mm load center. Load dimensions, mast height and attachments should also be checked before final configuration.
FB35 product imagery shows a hydraulic clamp configuration. Send the load dimensions, load type and required handling method so we can confirm the suitable attachment and capacity.
Product images show an enclosed cab configuration. We confirm the exact cab arrangement and any required options in the quotation.
The published standard electrical data lists 80 V / 500 Ah, while an 80 V / 450 Ah lithium battery is shown as an optional configuration.
Attachment weight and depth can change the load center and load moment. Capacity should therefore be checked using the selected attachment and actual load dimensions rather than nominal truck capacity alone.
Send maximum load weight and dimensions, required lift height, attachment type, aisle and doorway dimensions, cab requirement, shift hours, battery preference, quantity and destination.
Configure the FB35 Around the Load and Attachment
Send us the maximum load weight, load dimensions, lift height, attachment type, working space, cab requirement, shift pattern, battery preference, quantity and destination. We will use these details to confirm the appropriate FB35 truck configuration before quotation.
Hot Tags: 3.5 ton electric forklift truck, FB35 forklift, 3500kg electric forklift, electric forklift with cab, forklift clamp attachment, lithium electric forklift, electric counterbalance forklift, electric forklift for sale, forklift truck 2 5 ton, 3t electric counterbalanced forklift truck, counterbalanced forklift truck 2 5 tonne, max truck 2 5 tonne forklift, forklift truck 3 0 tonne
