FG20 dual-fuel counterbalance truck
Plan the truck around the load, aisle and fuel system
The Xinghao FG20 is a 2 ton LPG gasoline forklift rated for 2,000 kg at a 500 mm load center. Its published dimensions and performance data support an initial site-fit review, while the engine variant, fork length and LPG cylinder package should be fixed in the quotation before production.
2,000 kgrated capacity
500 mmrated load center
3,000 mmmaximum lift height
2,170 mmminimum turning radius
Three checks before selecting an FG20
1
Match the load geometry
Capacity is stated at a 500 mm load center. Provide pallet size, load dimensions, weight distribution, attachment and required lift height so the applicable capacity can be confirmed.
2
Measure the operating route
Compare the 1,150 mm truck width, 2,170 mm turning radius, 2,090 mm overhead-guard height and 2,040 mm lowered mast height with aisles, doors and trailers.
3
Define both fuel modes
Confirm the gasoline specification and the LPG cylinder, valve, connector, mounting and changeover arrangement for the destination market. The cylinder should not be assumed to be included.
What dual fuel changes in the purchase specification
Gasoline and LPG capability gives a fleet two fuel choices, but it also creates several items that must be agreed at order stage. A complete quotation should identify the selected engine, fuel-change procedure, compatible cylinder hardware and the components supplied with the truck.
- State the destination country and applicable fuel-system requirements.
- Confirm LPG cylinder size, valve standard and connector type.
- List whether the cylinder, bracket, regulator, hose and guard are included.
- Request operating and maintenance instructions for the delivered configuration.
- Assess ventilation, fire controls and fuel storage under local site rules.
LPG-equipped forklift shown for fuel-system layout reference. Confirm the exact FG20 cylinder package in the order documents.
Published FG20 specification
| Item | Published value | Why it matters |
|---|---|---|
| Model / power unit | FG20 / gasoline and LPG | Identifies the dual-fuel 2-ton platform. |
| Rated capacity | 2,000 kg | Applies at the stated load center and standard configuration. |
| Load center | 500 mm | Long or uneven loads can change usable capacity. |
| Maximum lift height | 3,000 mm | Check against rack beam height and required clearance. |
| Free lift | 150 mm | Relevant where overhead clearance is restricted. |
| Mast tilt, forward / backward | 6° / 12° | Supports load pickup and travel positioning. |
| Overall length, without forks | 2,605 mm | Use with the confirmed fork length for route planning. |
| Overall width | 1,150 mm | Compare with aisle, door and staging-space widths. |
| Overhead-guard height | 2,090 mm | Check doors, containers and low structures. |
| Mast height, lowered | 2,040 mm | Confirm entry clearance with the ordered mast. |
| Minimum turning radius | 2,170 mm | One input for aisle and intersection review. |
| Travel speed, loaded / unloaded | 17 / 19 km/h | Site speed limits and traffic rules still govern operation. |
| Lift speed, loaded / unloaded | 650 / 710 mm/s | Useful for preliminary duty-cycle comparison. |
| Gradeability, loaded | 21% | Confirm ramp conditions, traction and operating procedure. |
| Service weight | 3,310 kg | Relevant to floors, docks and transport planning. |
| Front / rear pneumatic tyres | 7.00-12-12PR / 6.0-9-10PR | Verify tyre type for the actual floor and route. |
Cylinder-mounting example. Valve, bracket, hose and regulator details must match the delivered fuel system.
Fuel-system handover should be documented
Before commissioning, the receiving team should have the correct operating manual, fuel identification, inspection points and shutdown procedure for the supplied truck. Cylinder handling and fuel-system work should be assigned only to trained, authorized personnel under the site's safety rules.
For enclosed or partly enclosed work areas, the buyer should assess ventilation, air monitoring and combustion-equipment restrictions according to local law and the facility risk assessment. The fuel type alone does not establish that a truck is suitable for indoor use.
Where this truck can be evaluated
Pallet handling
Moving palletized goods at production, storage and dispatch areas where load weight and center remain within the confirmed rating.
Truck and trailer loading
Loading routes should be checked for deck capacity, dock condition, overhead clearance, turning space and ventilation requirements.
Warehouse-to-yard transfer
Useful where a combustion-powered counterbalance truck is permitted and the route includes suitable surfaces, traffic controls and refueling arrangements.
Covered loading bays
Evaluate airflow, fire controls, local restrictions and the facility's equipment policy before selecting the fuel mode.
Get a configuration matched to your site
Send the load, lift height, aisle and doorway dimensions, working environment, operating hours, destination market and preferred LPG cylinder standard. Xinghao can then confirm the applicable 2 ton LPG gasoline forklift configuration and quotation scope.
Maintenance points for purchase planning
Fuel system
Include routine inspection of the cylinder mounting, hoses, connections and regulator in the site maintenance program. Use the delivered manual and qualified service personnel.
Mast and hydraulics
Inspect chains, rollers, forks, carriage and hydraulic components at the intervals specified for the delivered truck and actual duty cycle.
Tyres and brakes
Track tyre condition, inflation where applicable, brake performance and steering response. Surface condition and duty intensity affect service needs.
Frequently asked questions
Is the FG20 an LPG-only forklift?
No. The published power-unit description identifies gasoline and LPG, so the product should be specified as a dual-fuel truck. Confirm the fuel-change system and supplied components in the quotation.
What is the rated capacity?
The published rating is 2,000 kg at a 500 mm load center. Actual usable capacity depends on load geometry, lift height, mast and any attachment, so request the applicable load information for your configuration.
Is an LPG cylinder supplied as standard?
The current standard-configuration text says the tank is not included. The order should state the cylinder, valve, connector, bracket, regulator and hose scope explicitly.
Which engine and fork length will be delivered?
The current page contains conflicting engine and fork data. Ask Xinghao to identify the engine model and fork dimensions in the signed quotation and final specification sheet.
Can this forklift work indoors?
Indoor suitability cannot be decided from fuel type alone. The buyer must assess ventilation, emissions exposure, fire controls and local rules for combustion-powered equipment at the intended site.
What information is needed for a quotation?
Provide load weight and dimensions, lift height, aisle and doorway measurements, floor or yard conditions, duty hours, destination market, fuel preference, cylinder standard and required attachments.
Compare and prepare the purchase
If the 2-ton rating does not match the load, compare adjacent capacities before choosing an attachment or mast. Service and operator-document requirements should be discussed at the same time as the truck configuration.
LPG & gasoline forklift range 2.5 ton LPG & gasoline forklift 3 ton LPG & gasoline forklift Warehouse logistics solutions After-sales and parts Manuals and training
Published values are for initial comparison. Final specifications, supplied components and compliance documents are governed by the confirmed order configuration.
Hot Tags: 2 ton lpg＆gas forklift, China 2 ton lpg＆gas forklift suppliers, factory, FD50 diesel forklift, 3 5Ton Diesel Forklift Isuzu Engine , counterbalanced 2 ton forklift, FD35, 7 0T forklift with Mitsubishi S6S T, 4 T Forklift
