5014 High-Reach Telehandler
5 Ton Capacity with 14 m Vertical Reach
The 5014 telehandler combines a 5,000 kg rated load with 14 m maximum lifting height and 7.46 m horizontal reach. A WEICHAI diesel engine, hydrostatic transmission, self-leveling forks and selectable steering modes support high-reach handling on construction, agricultural and industrial worksites.
5,000 kg Rated lifting capacity
14 m Maximum lifting height
7.46 m Maximum horizontal reach
92 kW Rated engine output
Extended boom and front stabilizers for high-level material placement.
Front stabilizer position with the boom raised vertically.
Side profile of the 5014 high-reach telescopic handler.
High-Reach Configuration
What Matters When Working Above 10 Metres
At 14 m lifting height, machine selection depends on the working load at boom extension, available stabilizing space, ground condition and the attachment fitted to the carriage.
Self-Leveling Forks
Fork leveling helps maintain load orientation while the boom raises and lowers.
Load Limiter
The listed configuration includes a load limiter for operation within the permitted lifting envelope.
Hydrostatic Transmission
Hydrostatic drive supports controlled travel and positioning when approaching a lift point.
Swinging Rear Axle
Rear axle articulation helps the chassis follow changing outdoor ground conditions.
Hydraulic Wet Axle
The published machine configuration specifies a hydraulic wet axle arrangement.
Attachment Hydraulics
Extra hydraulic piping and valve provisions support compatible hydraulic attachments.
Technical Data
5 Ton 14 m Telehandler Specifications
Core Operating Data
- Rated load: 5,000 kg
- Lift height: 14 m
- Horizontal reach: 7.46 m
- Machine weight: 10,500 kg
- Maximum speed: 30 km/h
- Hydraulic pressure: 30 MPa
| Model | 5014 |
|---|---|
| Rated Load | 5,000 kg |
| Maximum Lifting Height | 14 m |
| Maximum Horizontal Reach | 7.46 m |
| Engine | WEICHAI National 5 |
| Rated Engine Power | 92 kW at 2,200 rpm |
| Transmission | Hydrostatic |
| Maximum Travel Speed | 30 km/h |
| Machine Weight | 10,500 kg |
| Hydraulic System Pressure | 30 MPa |
| Hydraulic Oil Tank | 450 L |
| Diesel Tank | 260 L |
| Tire Size | 16.70-24 off-road tire |
| Steering Modes | Front-wheel / four-wheel / crab steering |
| Fork Leveling | Self-leveling |
| Attachment Hydraulics | Additional hydraulic pipe and valve |
| Cab Equipment | Air conditioning, heating, fan and adjustable seat |
Load Chart Selection
Do Not Select a 14 m Telehandler by Tonnage Alone
The 5,000 kg rating does not mean the machine can carry 5,000 kg at every boom position. Available capacity changes as the boom rises and extends forward.
Attachment weight and load center also affect the permissible working load.
- Maximum load weight
- Load dimensions and load center
- Required lifting height
- Required horizontal reach
- Attachment type and weight
- Ground and stabilizer conditions
Send the Actual Lift Position
For a high-reach telehandler, the most useful selection information is the combination of load weight, vertical height and horizontal placement distance.
Send all three values so the operating requirement can be checked before pricing.
Steering & Positioning
Three Steering Modes for Different Work Areas
Front-Wheel Steering
Suitable for normal site travel where there is adequate turning space.
Four-Wheel Steering
Reduces the space required to turn around structures, stored materials and restricted access routes.
Crab Steering
Allows diagonal movement when lateral alignment is needed beside a wall, stack or placement point.
Application Fit
Where 14 m Reach Adds Practical Value
Construction
High vertical reach supports placement of palletized building materials, structural components and other loads at elevated work positions.
Agriculture
Self-leveling forks and attachment hydraulics support handling around storage yards, feed areas and other outdoor agricultural sites.
Industrial Yards
Five-ton rated capacity and 7.46 m forward reach suit jobs where heavy materials must be placed beyond an obstacle or at height.
Powertrain
WEICHAI Diesel with Hydrostatic Drive
The published 5014 configuration uses a WEICHAI National 5 diesel engine rated at 92 kW at 2,200 rpm.
Hydrostatic transmission supports controlled travel when approaching a loading point or repositioning beneath an elevated work area.
Operator Environment
Cab Equipment for Outdoor Shifts
The listed cab equipment includes air conditioning, heating, a fan and an adjustable seat.
Cab glass protection is also included in the published configuration for work around outdoor materials and construction areas.
Attachment Planning
Match the Front Tool to the Material
The machine includes additional hydraulic pipe and valve provisions for compatible attachments. The attachment should be selected at the same time as the load chart because attachment weight and geometry change the working load.
1
Pallet Loads
Provide pallet size, load center and maximum load weight.
2
Bulk Material
Provide material type, density and required bucket capacity.
3
Special Loads
Provide load shape, dimensions and required gripping method.
4
Hydraulic Tools
Confirm the hydraulic interface before the attachment specification is finalized.
Before Quotation
Data Needed for Model Confirmation
1
Load
Maximum weight, dimensions and load center.
2
Reach
Required vertical height and horizontal placement distance.
3
Worksite
Surface condition, slope, access width and stabilizer space.
4
Order
Quantity, destination country and attachment requirements.
Continue Selection
Compare Telehandlers and Supplier Support
Telehandler Range Compare different lifting capacities and reach classes. 4WD Rough Terrain Equipment Compare off-road handling equipment when telescopic reach is not required. Construction & Mining Review equipment for construction and demanding outdoor material handling. Agriculture & Forestry Review machines for outdoor agricultural material handling. After-sales & Parts Review parts and service support for exported equipment. About Xinghao Review company and equipment manufacturing information. Contact Xinghao Send load, reach and purchasing requirements. Manuals & Training Review operator and equipment support resources.
FAQ
5 Ton 14 m Telehandler Buying Questions
What is the rated capacity of the 5014 telehandler?
The published rated capacity is 5,000 kg. Actual allowable load depends on boom height, horizontal reach, load center and attachment.
What is the maximum lifting height?
The 5014 specification lists a maximum lifting height of 14 meters.
What is the maximum horizontal reach?
The published maximum horizontal reach is 7.46 meters. Working capacity at that reach should be checked against the load chart for the ordered configuration.
Which steering modes are available?
The published specification lists front-wheel steering, four-wheel steering and crab steering.
What engine is fitted to this 5 ton 14 m telehandler?
The published 5014 configuration lists a WEICHAI National 5 diesel engine rated at 92 kW at 2,200 rpm.
What should I provide for a quotation?
Provide maximum load weight, required lifting height and forward reach, attachment type, worksite conditions, quantity and destination country.
Confirm the Working Load at Your Required Reach
Send the maximum load, required vertical height, horizontal reach, attachment type, worksite conditions, quantity and destination country. These details allow the 5014 configuration to be checked against the intended lifting duty before quotation.
Hot Tags: 5 ton 14 m telehandler, 5 ton telehandler, 14m telehandler, telehandler manufacturer, telehandler supplier, telescopic handler, high reach telehandler, telehandler forklift
